Toll Free
1-(800) 874-8552

Canon MG2522 Driver

Canon Pixma MG2522 has high-volume, low-cost print, scan, and copy with the PIXMA MG2522 Wireless All-in-One Printer. It has a huge integrated ink tank that can generate approximately 7700 color pages or 6000 black and white pages. The MG2522 prints sharp images at resolutions up to 4800 x 1200 dpi, while pigment-based black ink prints minor font text and is readable.

canon mg25222 driver install

Wireless - Print - Copy - Scan - Fax

How to unbox and set up Canon PIXMA MG2522 printer?

Uncover the Canon printer

  • Take the Canon Pixma MG2522 printer from the package.
  • Remove the protective coverings.
  • Review the printer and its accessories for any damages.
  • Place the canon Pixma MG2522 printer close to a wall outlet.
  • Make sure the surface is flat and clean.
  • Place the printer on the same.
canon mx532

Power up the Canon Printer

  • The printer box arrives with the USB cable and wire outlet.
  • Use the wire outlet to connect one end to the Canon Pixma MG2522 printer and another end to the power grid.
  • Turn ON the Canon printer.

Set preference, Load paper, and ink cartridge.

  • Type and save the user data to the printer.
  • Remove the seal from the ink cartridge.
  • Now feed it in the cartridge compartment.
  • Insert the document feeder with a stack of A4 printing sheets.
  • Complete the Canon Pixma MG2522 printer setup.

Download the Canon suitable driver.

  • Turn ON the computer and go to the browser.
  • Visit the Canon official website to download the driver for the Canon printer.
  • Click the download button to download the driver.
  • Save the driver file as a .exe extension folder.
  • Get the given instructions to set up the canon driver install.
  • Opt for the method of internet connection.
  • Complete the driver setup and take a trial print.

Canon MG2522 Driver Download & Installation for windows 10

  • Turn ON the router and the windows.
  • Update the windows to the latest version.
  • Access the canon’s official website.
  • Find a suitable driver for canon and download it.
  • The driver file will auto-save in a separate folder.

Install driver for Canon MG2522 setup.

  • Double click on the driver file.
  • Complete the installations, follow the on-screen orders.
  • Complete the Canon Pixma MG2522 printer driver installation on windows.
  • Restart the Windows > Go to setting > press printer and scanners.
  • Register the printer by pressing the Add button.
  • Now, choose any document in the windows to take a sample print.

Canon MG2522 Driver Download & Installation for Mac

Using the driver CD/DVD

  • Turn ON the Canon Pixma MG2522 printer and complete the setup by turning on the printer.
  • Take the CD drive and insert CD it onto the MAC device.
  • Go to the CD Drive in the MAC.
  • Click the Run option to process the Canon driver installation.

Install driver for Canon MG2522 setup.

  • Click the terms and conditions to approve the License Agreement.
  • Proceed with the printer driver installation till you see the connection is confirmed.
  • Finish the driver installation setup using the on-screen instructions.
  • Add a printer to the MAC device and start the Print job.

Canon PIXMA MG2522 Wireless Setup

Wireless setup is a technique to complete the printing procedure in a short time operating many wireless procedures. So, complete the wireless setup for the Windows 10 and Mac system appliances using the given steps below.

Canon MG2522 wireless setup for windows 10

  • Switch on the printer, use the Control Panel and go to settings.
  • Tap on “Device Settings”.
  • Tap on WLAN Settings and afterward OK.
  • Tap on the Change Wireless/Wired option
  • Follow the process given in the on-page guidelines provided.
  • Choose the required home network and enter the passkey
  • Complete the Canon MG2522 Wi-Fi setup.

Adjust the printer settings.

  • Turn ON the windows device. Click the star icon.
  • Press settings and select the Printer & Scanners icon.

Run PIXMA MG2522 Setup CD

  • To process the Printer setup CD, turn ON the windows.
  • Insert the CD into the drive and follow the on-screen steps.
  • The canon driver installation cycle starts.

Choose the Connection Type.

  • Proceed with the wizard steps to set the connection procedure.
  • Now choose the name of the wireless network and enter its password.
  • Go through the wizard and finish Canon MG2522 wireless setup.

Canon MG2522 wireless setup for mac

Adjust the printer setting.

  • Turn ON the MAC device. Press the Apple icon.
  • Press System Preferences. Select the Printer & Scanners.

Run Pixma MG2522 Setup CD

  • Click the plus symbol to add the printer.
  • Inject the CD-ROM into the MAC.
  • Select the user place, printer name in the device.
  • A new window will open. Click on the IP icon.
  • Fill out the information

Choose the Connection Type.

  • Click the CD driver and press the download button
  • The setup file will autosave in the system.
  • Double-click the downloaded .exe file.
  • Click the AutoPlay screen > click Yes on the User Account Control box.

USB Setup for Canon MG2522 printer

Link your Canon PIXMA MG2522 printer to a device using a USB connection. Complete the procedure using the instructions given below. The wired setup allows the printer to print in the Absence of a wireless network.

Use Canon PIXMA MG2522 Setup File

  • First, run and install the Canon setup file on the desktop.
  • Follow the on-page guidelines and setup guidelines.
  • Continue with the on-page guidelines steps.
  • Now the connection method screen will be seen.

Set the Region and Connection Mode

To link the Canon printer to a computer using the USB cable, follow the below procedures without skipping any steps to avoid errors.

  • Click the next button > USB connection.
  • Connect the printer to the computer with a USB cable.
  • Follow any on-screen instructions to proceed with the software installation.
  • TURN ON the Canon Pixma MG2522 printer.
  • Click the next option.
  • Press the agree button to install the Extended Program.
  • The Test Print window will appear.
  • Now perform a test print to check the USB connection.